Dreame A1 Pro — Robot lawn mowers
Dreame A1 Pro
Robot lawn mowers F2 · Intermediate

Dreame A1 Pro

Working area capacity 2000 m²
Maximum slope 45 %
Boundary wire required No
All specifications ↓
Estimated price range
450–1000 € ≈ $486–$1,080
An editorial estimate, not a selling price

CobotCompare does not sell and does not show shop prices: check the price where you buy.

Data from official source

Dreame A1 Pro is a robot lawn mower for lawns up to 2,000 m² that works without a boundary wire or RTK stations: the 3D LiDAR (the laser sensor that measures the surroundings) draws the map and detects obstacles all around. The rain sensor sends it back to the base and it resumes work once the rain stops; the app manages multiple zones, no-go zones and custom cutting patterns.

CobotCompare Awards

Best value Intermediate · Robot lawn mowers

Best ratio of technical score to price among the 7 sheets in the Robot lawn mowers category (intermediate tier): technical score 78/100. The price used is the sheet's estimated range.

How we assign awards →
Data verified

Technical specifications

How it works
Parameter Value Source
Working area capacity 2000 m²

This is the area the mower covers in ideal conditions, and manufacturers state it with a tolerance (Husqvarna prints ±20%). A garden split into several zones, with trees or narrow passages, costs more than the square metres suggest: choose with headroom rather than at the limit.

Compiled by editorial team
Cutting width 22 cm Compiled by editorial team
Cutting height, minimum 30 mm Compiled by editorial team
Cutting height, maximum 70 mm Compiled by editorial team
Number of blades 3 Compiled by editorial team
Maximum slope 45 %

Measure the slope at the steepest point of the lawn, not on average, and remember the declared figure assumes dry grass in ideal conditions. If the lawn comes close to this value you need headroom: a mower at its limit slips and leaves strips of uncut grass.

Compiled by editorial team
Navigation and size
Parameter Value Source
Navigation system LiDAR Compiled by editorial team
Obstacle avoidance LiDAR, Lift sensor Compiled by editorial team
Boundary wire required No

«No boundary wire» does not mean «no installation»: satellite models need an antenna placed where it can see the sky, and under tree canopies or next to a high wall the signal can drop out. The wire goes away, the site survey does not.

Compiled by editorial team
Weight 12.6 kg Compiled by editorial team
IP rating IPX6 Compiled by editorial team
Rain sensor Yes Compiled by editorial team
Battery
Parameter Value Source
Charging time 65 min Compiled by editorial team
Battery capacity 5 Ah Compiled by editorial team
App and smart home
Parameter Value Source
App Dreamehome Compiled by editorial team
Summary

Pros and cons

In favour

  • Works without a boundary wire and without RTK stations.
  • The rain sensor sends it back to the base and it resumes work when the rain stops.
  • Handles slopes up to 45% inside the working area.
  • The Dreamehome app manages multiple zones, no-go zones and custom cutting patterns.

Worth knowing

  • The dual map requires a second charging station, which is sold separately. source
  • Cutting right up to the edge is effective only on level boundaries, without steps or breaks. source
  • In standard mode the robot covers 1,000 m² in 24 hours: reaching 2,000 m² in 24 hours takes the efficient mode.
If not this one

Alternatives in the catalogue

Chosen by the declared use tier and footprint, not by price: we don't publish prices.

Updates to this sheet and Manufacturer Notes
  1. Sheet published
  2. Specifications updated: immagine, candidate photos, peso,
  3. Price updated