Aiper Scuba X1 vs WYBOT S2
Technical comparison · Pool cleaning robots
Aiper Scuba X1 and WYBOT S2 are cordless pool robots that clean floor, walls and waterline. The difference that decides is pool size: 200 m² declared for Scuba X1, 300 m² for S2.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | — | ~450–1000 € |
| Category specs | ||
| Pool type | In ground | — |
| Surfaces cleaned | Floor, Walls, Waterline | Floor, Walls, Waterline |
| Power source | Cordless, battery powered | Cordless, battery powered |
| Maximum pool area | 200 m² | 300 m² |
| Runtime (cordless models) | 180 min | 210 min |
| Charging time | 240 min | 180 min |
| Filtration fineness | 3 µm | — |
| Filter basket capacity | 5 l | — |
| How it is retrieved from the water | — | Parks itself at the waterline |
| App | — | WYBOT |
| Ecosystem | ||
| Software notes | — | It is controlled with the WYBOT app as well as manual controls on the robot; cycles can be scheduled up to 4 times every 7 days. |
The differences that matter
- Area 200 m² vs 300 m² → between 200 and 300 m² only S2 is within its declared figure.
- Runtime 180 min vs 210 min → half an hour more per cycle on S2.
- Recharge 240 min vs 180 min → S2 is ready again an hour sooner.
In short
Aiper Scuba X1
For an in-ground pool of up to 200 m², Scuba X1 declares a 3 µm filter and a 5-litre basket. The trade-off is 180 minutes of runtime against S2's 210 and a 240-minute recharge. Figures are declared by the manufacturer.
WYBOT S2
For pools between 200 and 300 m², only S2 is within its declared figure; recharge takes 180 minutes and the robot climbs out to the edge by itself. It is controlled with the WYBOT app, with scheduling of up to 4 cycles a week. The advantage matters only beyond 200 m².
Where to buy
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.