Aiper Scuba X1 vs WYBOT C2
Technical comparison · Pool cleaning robots
Aiper Scuba X1 and WYBOT C2 declare the same maximum area, 200 m², and the same runtime, 180 minutes. What decides is pool type: Scuba X1 is listed for in-ground pools, C2 for above-ground ones too.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | — | ~450–1000 € |
| Universal specs | ||
| Weight | — | 7.98 kg |
| Category specs | ||
| Pool type | In ground | Above ground, In ground |
| Surfaces cleaned | Floor, Walls, Waterline | Floor, Walls, Waterline |
| Power source | Cordless, battery powered | Cordless, battery powered |
| Maximum pool area | 200 m² | 200 m² |
| Runtime (cordless models) | 180 min | 180 min |
| Charging time | 240 min | 180 min |
| Filtration fineness | 3 µm | 10 µm |
| Filter basket capacity | 5 l | 3 l |
| How it is retrieved from the water | — | Parks itself at the waterline |
| Weight | — | 7.98 kg |
The differences that matter
- Pool type: in-ground only vs above-ground and in-ground → for an above-ground pool only C2 is declared.
- Filtration 3 µm vs 10 µm → Scuba X1 traps smaller particles.
- Basket 5 l vs 3 l → Scuba X1's needs emptying less often.
- Recharge 240 min vs 180 min → C2 is ready again an hour sooner.
In short
Aiper Scuba X1
For an in-ground pool, Scuba X1 declares a 3 µm filter and a 5-litre basket, which needs emptying less often. The trade-off is that the declared pool type is in-ground only and recharging takes 240 minutes. Figures are declared by the manufacturer.
WYBOT C2
For an above-ground pool, C2 is the only one of the two declared for it; it also covers in-ground. Recharge takes 180 minutes. The cost is a 10 µm filter and a 3-litre basket.
Where to buy
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.