Aiper Scuba X1 Pro Max vs WYBOT S2
Technical comparison · Pool cleaning robots
Two cordless robots for pools of about 300 m² (297 vs 300 m², manufacturer-declared values), cleaning floor, walls and waterline. What decides is the cycle: 300 minutes for the Aiper Scuba X1 Pro Max, 210 for the WYBOT S2, which sits in a lower price range.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | ~450–1000 € |
| Category specs | ||
| Surfaces cleaned | Floor, Walls, Waterline | Floor, Walls, Waterline |
| Power source | Cordless, battery powered | Cordless, battery powered |
| Maximum pool area | 297 m² | 300 m² |
| Runtime (cordless models) | 300 min | 210 min |
| Charging time | — | 180 min |
| Filtration fineness | 3 µm | — |
| Filtration flow rate | 536 l/min | — |
| How it is retrieved from the water | — | Parks itself at the waterline |
| App control underwater | With an accessory | — |
| App | Aiper | WYBOT |
| Ecosystem | ||
| Software notes | — | It is controlled with the WYBOT app as well as manual controls on the robot; cycles can be scheduled up to 4 times every 7 days. |
The differences that matter
- Runtime: 300 vs 210 min → the Aiper works longer before returning to charge.
- Price ranges: far apart → the extra spend mostly goes to filtration and cycle length.
In short
Aiper Scuba X1 Pro Max
A large pool cleaned in one long run, where fine filtration matters: the filter is declared at 3 µm and the flow at 536 litres per minute. Underwater, the robot is controlled from the app only with an accessory. The trade-off is a higher price range.
WYBOT S2
A pool cleaned on a schedule: the WYBOT app sets up to 4 cycles every 7 days, recharging takes 180 minutes and the robot climbs back to the edge on its own. The trade-off is a shorter cycle.
Where to buy
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.